| (contained in individual sets or tool crib) |
| Hex Key Wrench Set - Standard |
| (.050" - 3/8") |
| (7/16" - 1/2" optional) |
| Hex Key Wrench Set - Metric (2mm - 12mm) |
| Stud-to-Post or Charging/Test Adapter cable shop tool |
| Chisels - Cold 5/8", 3/4" |
| Chisels - Half round nose Cape - 5/16 |
| Combination Wrenches: |
| Standard (3/8" - 1") (up to 1 and 1/4" optional) |
| Metric (6mm - 19mm) (up to 24mm optional) |
| 12" Adj wrench |
| Digital Multimeter - minimum 10 meg. ohms impedance |
| Electrical Pliers - Crimper/Stripper |
| Files and Handles: |
| 12" Fine |
| 12" Coarse |
| 12" Half Round |
| 8" Round file (Bastard cut) with Handle |
| Flare Nut Wrench Set |
| Standard (3/8" - 3/4") |
| Metric (7mm - 19mm) |
| Flashlight/Inspection Light |
| Goggles - (per OSHA requirements) Shop Supplied |
| Hack Saw |
| Hammers: |
| Ball Peen - 16 oz. |
| Cross peen hammer 40 oz. |
| Soft Face - Dead Blow 32 oz. |
| Hearing Protection - (per OSHA requirements) plugs shop supplied |
| Inspection Mirror |
| Magnetic Pickup Tool |
| Mechanic's Steel Ruler - Machinist Rule |
| Pliers: |
| Adjustable Joint Channel 20" |
| Locking Pliers 10" |
| Needle Nose with cutter |
| Side Cutters cushion grip |
| Slip-joint STD cushion grip |
| Snap ring pliers fixed tip (0 degree - .038 - .047 - .070; 90 degree .038 - .090) |
| Snap ring pliers 3/32 with 1/8 dimple 90 degree 8 7/8" |
| Punches: |
| Pin 3/16" - 3/8" |
| Starter 3/16" - 3/8" |
| Aligning Punchs Pry bar 16" and 20" Rolling Head |
| Pry bar with Handle 24" |
| Brass punch 3/4 dia. |
| Center punch |
| Safety Glasses (Side Panels) - (per OSHA requirements) |
| Scraper - 1" wide or larger |
| Screwdriver - Blade Type: |
| 1" |
| 6" |
| 9" |
| 12" |
| Offset straight - phillips |
| Hand Tools (cont.) |
| Screwdriver - Phillips: |
| 1" #2 |
| 6" #1, #2 |
| 12" #3 |
| Ratchet screwdriver with T8 - T9 - T10 - T15 - T20 - T25 |
| Socket set 1/4 drive |
| 3/16" - 1/2" U.S. Deep |
| 4mm - 13mm Metric Standard Depth |
| 4mm - 13mm Metric Deep |
| Extensions - Short, Medium, and Long 2 - 4 - 6" |
| Ratchet Handle |
| Universal Joint |
| Socket Set - 3/8" Drive: |
| 3/8" - 3/4" U.S. Standard Depth (12 point), Chrome |
| 3/8" - 3/4" U.S. Deep (6 point), Impact |
| 10mm - 19mm Metric Standard Depth (12 point) Chrome |
| 10mm - 19mm Metric Deep (6 point), Impact |
| Extensions - Short, Medium, and Long 3 - 6 - 11" |
| Ratchet Handle |
| Universal Joint impact |
| Adapter 3/8 - 1/2 drive |
| Socket Set - 1/2" Drive: |
| 1/2" – 1 ?" Shallow, 12 point Chrome |
| 7/16" – 1 ?" Deep, 6 point Impact |
