CARPENTRY, COMMERCIAL


Award: Diploma / 64 Credits
Location: Austin  
Program Starts:
Course Plan: Two Year

You can build a solid framework for a successful carpentry career during this two-year program. Each instructor has at least 2,000 hours of work experience in the trade and Minnesota Vocational Teaching licenses.

Our 20-to-1 student-to-teacher ratio creates an ideal learning environment. Students participate in actually building a house, from initial site work and footings through the interior and exterior finish, during each year of the Riverland program.

Articulation Agreements

INSTITUTIONAWARD DEGREE CURRICULUM AGREEMENT
MSU-Moorhead BS - Operations Management Degree Curriculum Agreement (PDF)

Related Programs

 
Request information today about Carpentry, Commercial!
First Name
Last Name
Birthdate
Year:
E-mail
Address
City
State
Zip Code
Preferred Phone
Are you interested receiving text from Riverland?
YES
Intended Start Date
Enter Text Below:



 
Carpentry, Commercial Diploma was last updated on 12/07/2015
Note: This is an unofficial document that should be used for planning purposes only. Course listings are provided only as a guideline and may be changed.

Course Sequence Example Plan - Two Year

Fall Semester - First Year
Course # Course Title Credits
CARP1110
Construction Material and Tool Safety
This course prepares the student to safely use power and hand tools in the construction trades. The study of construction materials and fastening procedures are covered. A series of required hand and power tool projects are completed in the carpentry lab. This course is part of the Carpentry program which is accredited by the Home Builders Institute (HBI) and the National Association of Home Builders (NAHB). (3 Cr - 1 lect, 2 lab)
3.00
CARP1125
Wall and Floor Framing/Sheeting and Building Layout
This course introduces basic principles of residential framing. The student studies types of residential framing: floor and walls. This course is part of the Carpentry program which is accredited by the Home Builders Institute (HBI) and the National Association of Home Builders (NAHB). Prerequisites: CARP 1110. (4 Credits - 1 lecture, 3 lab)
4.00
CARP1121
Blueprint Reading I
This course introduces basic blueprint reading, and estimating for residential construction. Students study and read a series of residential construction working drawings. The student identifies different prints used in building a residential home. Hand drafting and estimating of a garage are also completed. This course is part of the Carpentry program which is accredited by the Home Builders Institute (HBI) and the National Association of Home Builders (NAHB). (2 Cr - 1 lecture, 1 lab)
2.00
CARP1135
Roof Framing, Shingling, & Flashing
This course addresses how to properly install exterior wall components and roof framing. The student installs sheathing, siding, and completes a gable roof structure. Different types of materials and procedures for each process are covered. This course also introduces the erection of trusses and hand-framing of rafters. Correct methods of shingling, flashing, and proper ventilation are included. This course is part of the Carpentry program which is accredited by the Home Builders Institute (HBI) and the National Association of Home Builders (NAHB). Prerequisites: CARP 1110. (4 Cr - 1 lecture, 3 lab)
4.00
CARP1160
OSHA 10 Training
This course covers workplace safety practices and procedures for the building industry. The OSHA training for construction industry provides training for entry level workers and employers on the recognition, avoidance, abatement, and prevention of safety and health hazards in the workplace. Proper techniques for climbing, working overhead safety, and working with building materials will be covered. (1 Credits - 1 lecture, 0 lab)
1.00
MATH1020
Technical Math I
This course covers basic mathematics and elements of algebra that will prepare students for success in their specific technical areas. Students will develop their problem solving skills and master mathematical concepts used in specific technical applications. Students will receive a grade for this course. It will not meet MnTC Mathematics and Logical Reasoning requirements for graduation. Prerequisite: A score of 56 or above on the Accuplacer Arithmetic test, a score of 51 or above on the Elementary Algebra test or Math 0540. (2 Cr - 2 lect, 0 lab)
2.00
Total 16.00
Spring Semester - First Year
Course # Course Title Credits
CARP1215
Blueprint Reading II
This course introduces basic blueprint reading, estimating, and computer-aided design and drafting (C.A.D.D.) for residential construction. Students study and read a series of residential construction working drawings. The student identifies different blueprints used in building a residential home and draws a small residential home on a C.A.D.D. program. This course is part of the Carpentry program which is accredited by the Home Builders Institute (HBI) and the National Association of Home Builders (NAHB). Prerequisite: CARP 1110 and CARP 1121. (2 Cr - 1 lecture, 1 lab)
2.00
CARP1225
Exterior Siding and Finish
This course introduces the installation of all exterior doors and windows. Application of residential siding and soffit procedures are demonstrated. This course places emphasis on window identification, placement, and installation techniques. Installation of various hardware and door hanging procedures are demonstrated. This course is part of the Carpentry program which is accredited by the Home Builders Institute (HBI) and the National Association of Home Builders (NAHB). Prerequisite: CARP 1110. (4 Credits - 1 lecture, 3 lab)
4.00
CARP1235
Interior Finish I
This course emphasizes the basic concepts of interior finish in residential construction. The focus is on hanging, taping, and finishing of interior drywall, hanging and trimming interior doors and locksets, basic layout of floor tile and hardwood floors, cutting and installing baseboard and casing for doors and windows. This course is part of the Carpentry program which is accredited by the Home Builders Institute (HBI) and the National Association of Home Builders (NAHB). Prerequisites: CARP 1110. (2 Cr - 1 lecture, 1 lab)
2.00
CARP1245
Interior Millwork, Cabinet Installation, and Stairs
This course introduces the installation of interior doors, window trim, and stair railing. Staining and varnishing of millwork are included. The installation of finished wood floors or tile floors is introduced depending on class project. The course also introduces the installation of kitchen cabinets, vanities, and other built-ins. This course is part of the Carpentry program which is accredited by the Home Builders Institute (HBI) and the National Association of Home Builders (NAHB). Prerequisites: CARP 1110 and CARP 1235. (4 Credits - 1 lecture, 3 lab)
4.00
CARP1260
Deck Construction
This course emphasizes the basic concepts of deck construction methods. The focus is on application and techniques necessary to select materials and construct decks, railing, and stairs. Students design, plan, and construct a deck that meets the minimum requirements of the International Residential Code. This course is part of the Carpentry program which is accredited by the Home Builders Institute (HBI) and the National Association of Home Builders (NAHB). Prerequisites: CARP 1110. (2 Credits – 1 lecture, 1 lab)
2.00
Total 16.00
Fall Semester - Second Year
Course # Course Title Credits
CARP2150
Steel and Wood Framing
This course emphasizes various methods of wall framing. Different types of materials and methods used in framing are examined. Students participate in various methods of framing process. This course is part of the Carpentry program which is accredited by the Home Builders Institute (HBI) and the National Association of Home Builders (NAHB). (3Cr - 1 lecture, 2 lab)
3.00
CARP2155
Concrete, Forming and Finish
The students work on concrete footing, foundations and flatwork. Student will demonstrate forming and finishing skills. This course is part of the Carpentry program which is accredited by the Home Builders Institute (HBI) and the National Association of Home Builders (NAHB). (Cr 3 - 1 lecture, 2 lab)
3.00
CARP2160
Job Site Setup /Building Layout
This course examines the layout of a building project on a building site. Students work with setting elevations in preparation for excavation. Students will establish proper setbacks and locate building corners. Students will complete required site work plan and drainage plans as required by local government. This course is part of the Carpentry program which is accredited by the Home Builders Institute (HBI) and the National Association of Home Builders (NAHB). (2 Cr - 1 lecture, 1 lab)
2.00
CARP2165
Equipment Operation and Maintenance
Students will learn about proper ways to use equipment and how to determine if equipment needs to be removed from service. Students will perform regular maintenance on equipment. This course is part of the Carpentry program which is accredited by the Home Builders Institute (HBI) and the National Association of Home Builders (NAHB). (2Cr - 1 lecture, 1 lab)
2.00
CARP2170
Commercial Blueprint Reading I
Students in this course will begin to look at commercial blueprints. The students will study commercial plans and working drawings. This course is an introduction to commercial blueprint with basic terminology and print reading. This course is part of the Carpentry program which is accredited by the Home Builders Institute (HBI) and the National Association of Home Builders (NAHB). (2Cr – 1-lecture, 1- lab)
2.00
CARP2221
OSHA for Construction
This Occupational Safety and Health Administration (OSHA) Construction safety course trains workers and employers on recognition, avoidance, abatement and prevention of safety and health hazards in the workplace. This course includes information on workers' rights, employer responsibilities and how to file a complaint. This course is part of the Carpentry program which is accredited by the Home Builders Institute (HBI) and the National Association of Home Builders (NAHB). (2Cr - 2 lecture, 0 lab)
2.00
BUSO1620
Introduction to Computer
This course covers basic information about computer hardware and the use of computer software as a business productivity tool, as well as for personal use. Topics covered include the operating system and desktop environment; file and folder management; introduction to spreadsheet procedures; introduction to database creation and file management, fundamental word processing concepts, and presentation graphics. Some basic computer literacy will be covered, such as e-mail etiquette, ethical computing, document attachment to e-mail and use of digital files. This course is part of the Associate in Applied Science Administrative Assistant and Medical Administrative Assistant degrees which are accredited by the Accreditation Council for Business Schools and Programs (ACBSP). (2 Cr - 1 lect, 1 lab)
2.00
Total 16.00
Spring Semester - Second Year
Course # Course Title Credits
CARP1312
Construction Internship
This course is designed to provide the student with a purposeful occupational experience in the field of carpentry. Application of competencies gained from previous work experiences and/or coursework is emphasized. The instructor and student identify specific tasks to be accomplished by the student and develop an individualized training plan with an on-site supervisor. This course is part of the Carpentry program which is accredited by the Home Builders Institute (HBI) and the National Association of Home Builders (NAHB). Prerequisites: CARP 1110. (2 Credits – 0 lecture, 2 lab)
2.00
CARP2175
Interior Finishes II
Students in this course will learn about interior wall finishes, drop ceiling installation and layout. Students will correctly identify the type of finish from blueprints, detail drawings and specification book information. This course is part of the Carpentry program which is accredited by the Home Builders Institute (HBI) and the National Association of Home Builders (NAHB). (3 Cr – 1 lect, 2 lab)
3.00
CARP2215
Steel Frame Assembly and Construction Site Safety
This course will introduce students to the construction and erection of a steel frame building. Students will examine the various parts and assembly procedure used in steel frame erection. Students will identify possible hazards or OSHA violations. This course is part of the Carpentry program which is accredited by the Home Builders Institute (HBI) and the National Association of Home Builders (NAHB). (1 Cr – 1- lect, 0 lab)
1.00
CARP2232
Doors, Casework and Interior Hardware
In this course students will locate casework on blueprint and identify the correct hardware and cabinets. Students will install casework, hang doors with correct hardware, and complete other steps to close out a commercial project. This course is part of the Carpentry program which is accredited by the Home Builders Institute (HBI) and the National Association of Home Builders (NAHB). (3 Cr, 1 lect, 2 lab)
3.00
CARP2235
Estimating, Scheduling and Building Codes
This course will introduce students to various methods of estimating. Students will look at scheduling work with subcontractors on job sites in meeting the project schedule. The students will review codes and how they apply to different construction sites. The students will look up codes and explain their relevance to the job. This course is part of the Carpentry program which is accredited by the Home Builders Institute (HBI) and the National Association of Home Builders (NAHB). (1 Cr – 1 lect, 0 lab)
1.00
CARP2310
Commercial/Residential Construction Internship
In this course students will work on a construction site to gain real construction experience. Students will be introduced to the responsibility of a construction site with all the hazards and how to safely work with them. Students will learn how to work as a team. They will complete a minimum of three weeks full time on the job training. This course is part of the Carpentry program which is accredited by the Home Builders Institute (HBI) and the National Association of Home Builders (NAHB). (4 Cr - 0 lecture, 4 lab)
4.00
GSCM1510
Workplace Human Relations
This course examines interpersonal relationship skills in the work environment. Students evaluate individual strengths and weaknesses and assess and learn transferable skills. This course emphasizes employment-enhancing skills that include understanding and improving relationships and communication with co-workers, supervisors, subordinates, and customers. This survey course introduces concepts and methods for improvement of interpersonal relations. (2 Cr - 2 lect, 0 lab)
2.00
CARP2270
Commercial Blueprint Reading II
Students in this course will further advance their commercial blue print reading skills. The students will study commercial plans and working drawings. This course is part of the Carpentry program which is accredited by the Home Builders Institute (HBI) and the National Association of Home Builders (NAHB). (2Cr – 1-lecture, 1- lab)
2.00
Total 18.00
Carpentry, Commercial (DIP) Program Course Sequence was last updated on 12/07/2015
Estimated Tuition
64 cr  x  $185.00 = $11,840.00 
Books: contact program advisor 
Other Costs: contact program advisor 

Financial Aid:

Scholarships:

 

Tuition & Fees:

 

Program Graduate Outcomes

Upon completion of this program, the graduate will: Upon completion of this program, the graduate will:
  • Be able to correctly build a cabinet face frame.
  • Demonstrate proper use of personal safety equipment on a construction site.
  • Demonstrate framing wall layout using 16" O.C.
  • Properly setup and use builders level or laser level to read and record elevations.
  • Demonstrate knowledge of placing and finishing concrete using finishing tools in proper order.
  • Correctly measure and hang sheetrock.Measure and estimate the materials needed for a roofing project.

Carpentry, Commercial Faculty & Advisors

1-800-247-5039 / Directory

We are interested in your feedback. Do you have a question, suggestion or comment? If so, please fill out the form below. Your message will be forwarded to the appropriate person at Riverland. Thank you!
ALBERT LEA CAMPUS
2200 Riverland Dr.
Albert Lea, MN 56007
507-379-3300
AUSTIN CAMPUS
1900 8th Avenue NW
Austin, MN 55912
507-433-0600
OWATONNA COLLEGE & UNIVERSITY CENTER
965 Alexander Drive SW
Owatonna, MN 55060
507-455-5880
Required Core Courses (58 Credits)
Course ## Name
Credits
Course Outline
CARP1110
Construction Material and Tool Safety
This course prepares the student to safely use power and hand tools in the construction trades. The study of construction materials and fastening procedures are covered. A series of required hand and power tool projects are completed in the carpentry lab. This course is part of the Carpentry program which is accredited by the Home Builders Institute (HBI) and the National Association of Home Builders (NAHB). (3 Cr - 1 lect, 2 lab)
3.00 CARP1110
CARP1121
Blueprint Reading I
This course introduces basic blueprint reading, and estimating for residential construction. Students study and read a series of residential construction working drawings. The student identifies different prints used in building a residential home. Hand drafting and estimating of a garage are also completed. This course is part of the Carpentry program which is accredited by the Home Builders Institute (HBI) and the National Association of Home Builders (NAHB). (2 Cr - 1 lecture, 1 lab)
2.00 CARP1121
CARP1125
Wall and Floor Framing/Sheeting and Building Layout
This course introduces basic principles of residential framing. The student studies types of residential framing: floor and walls. This course is part of the Carpentry program which is accredited by the Home Builders Institute (HBI) and the National Association of Home Builders (NAHB). Prerequisites: CARP 1110. (4 Credits - 1 lecture, 3 lab)
4.00 CARP1125
CARP1135
Roof Framing, Shingling, & Flashing
This course addresses how to properly install exterior wall components and roof framing. The student installs sheathing, siding, and completes a gable roof structure. Different types of materials and procedures for each process are covered. This course also introduces the erection of trusses and hand-framing of rafters. Correct methods of shingling, flashing, and proper ventilation are included. This course is part of the Carpentry program which is accredited by the Home Builders Institute (HBI) and the National Association of Home Builders (NAHB). Prerequisites: CARP 1110. (4 Cr - 1 lecture, 3 lab)
4.00 CARP1135
CARP1160
OSHA 10 Training
This course covers workplace safety practices and procedures for the building industry. The OSHA training for construction industry provides training for entry level workers and employers on the recognition, avoidance, abatement, and prevention of safety and health hazards in the workplace. Proper techniques for climbing, working overhead safety, and working with building materials will be covered. (1 Credits - 1 lecture, 0 lab)
1.00 CARP1160
CARP1215
Blueprint Reading II
This course introduces basic blueprint reading, estimating, and computer-aided design and drafting (C.A.D.D.) for residential construction. Students study and read a series of residential construction working drawings. The student identifies different blueprints used in building a residential home and draws a small residential home on a C.A.D.D. program. This course is part of the Carpentry program which is accredited by the Home Builders Institute (HBI) and the National Association of Home Builders (NAHB). Prerequisite: CARP 1110 and CARP 1121. (2 Cr - 1 lecture, 1 lab)
2.00 CARP1215
CARP1225
Exterior Siding and Finish
This course introduces the installation of all exterior doors and windows. Application of residential siding and soffit procedures are demonstrated. This course places emphasis on window identification, placement, and installation techniques. Installation of various hardware and door hanging procedures are demonstrated. This course is part of the Carpentry program which is accredited by the Home Builders Institute (HBI) and the National Association of Home Builders (NAHB). Prerequisite: CARP 1110. (4 Credits - 1 lecture, 3 lab)
4.00 CARP1225
CARP1235
Interior Finish I
This course emphasizes the basic concepts of interior finish in residential construction. The focus is on hanging, taping, and finishing of interior drywall, hanging and trimming interior doors and locksets, basic layout of floor tile and hardwood floors, cutting and installing baseboard and casing for doors and windows. This course is part of the Carpentry program which is accredited by the Home Builders Institute (HBI) and the National Association of Home Builders (NAHB). Prerequisites: CARP 1110. (2 Cr - 1 lecture, 1 lab)
2.00 CARP1235
CARP1245
Interior Millwork, Cabinet Installation, and Stairs
This course introduces the installation of interior doors, window trim, and stair railing. Staining and varnishing of millwork are included. The installation of finished wood floors or tile floors is introduced depending on class project. The course also introduces the installation of kitchen cabinets, vanities, and other built-ins. This course is part of the Carpentry program which is accredited by the Home Builders Institute (HBI) and the National Association of Home Builders (NAHB). Prerequisites: CARP 1110 and CARP 1235. (4 Credits - 1 lecture, 3 lab)
4.00 CARP1245
CARP1260
Deck Construction
This course emphasizes the basic concepts of deck construction methods. The focus is on application and techniques necessary to select materials and construct decks, railing, and stairs. Students design, plan, and construct a deck that meets the minimum requirements of the International Residential Code. This course is part of the Carpentry program which is accredited by the Home Builders Institute (HBI) and the National Association of Home Builders (NAHB). Prerequisites: CARP 1110. (2 Credits – 1 lecture, 1 lab)
2.00 CARP1260
CARP1312
Construction Internship
This course is designed to provide the student with a purposeful occupational experience in the field of carpentry. Application of competencies gained from previous work experiences and/or coursework is emphasized. The instructor and student identify specific tasks to be accomplished by the student and develop an individualized training plan with an on-site supervisor. This course is part of the Carpentry program which is accredited by the Home Builders Institute (HBI) and the National Association of Home Builders (NAHB). Prerequisites: CARP 1110. (2 Credits – 0 lecture, 2 lab)
2.00 CARP1312
CARP2150
Steel and Wood Framing
This course emphasizes various methods of wall framing. Different types of materials and methods used in framing are examined. Students participate in various methods of framing process. This course is part of the Carpentry program which is accredited by the Home Builders Institute (HBI) and the National Association of Home Builders (NAHB). (3Cr - 1 lecture, 2 lab)
3.00 CARP2150
CARP2155
Concrete, Forming and Finish
The students work on concrete footing, foundations and flatwork. Student will demonstrate forming and finishing skills. This course is part of the Carpentry program which is accredited by the Home Builders Institute (HBI) and the National Association of Home Builders (NAHB). (Cr 3 - 1 lecture, 2 lab)
3.00 CARP2155
CARP2160
Job Site Setup /Building Layout
This course examines the layout of a building project on a building site. Students work with setting elevations in preparation for excavation. Students will establish proper setbacks and locate building corners. Students will complete required site work plan and drainage plans as required by local government. This course is part of the Carpentry program which is accredited by the Home Builders Institute (HBI) and the National Association of Home Builders (NAHB). (2 Cr - 1 lecture, 1 lab)
2.00 CARP2160
CARP2165
Equipment Operation and Maintenance
Students will learn about proper ways to use equipment and how to determine if equipment needs to be removed from service. Students will perform regular maintenance on equipment. This course is part of the Carpentry program which is accredited by the Home Builders Institute (HBI) and the National Association of Home Builders (NAHB). (2Cr - 1 lecture, 1 lab)
2.00 CARP2165
CARP2170
Commercial Blueprint Reading I
Students in this course will begin to look at commercial blueprints. The students will study commercial plans and working drawings. This course is an introduction to commercial blueprint with basic terminology and print reading. This course is part of the Carpentry program which is accredited by the Home Builders Institute (HBI) and the National Association of Home Builders (NAHB). (2Cr – 1-lecture, 1- lab)
2.00 CARP2170
CARP2175
Interior Finishes II
Students in this course will learn about interior wall finishes, drop ceiling installation and layout. Students will correctly identify the type of finish from blueprints, detail drawings and specification book information. This course is part of the Carpentry program which is accredited by the Home Builders Institute (HBI) and the National Association of Home Builders (NAHB). (3 Cr – 1 lect, 2 lab)
3.00 CARP2175
CARP2215
Steel Frame Assembly and Construction Site Safety
This course will introduce students to the construction and erection of a steel frame building. Students will examine the various parts and assembly procedure used in steel frame erection. Students will identify possible hazards or OSHA violations. This course is part of the Carpentry program which is accredited by the Home Builders Institute (HBI) and the National Association of Home Builders (NAHB). (1 Cr – 1- lect, 0 lab)
1.00 CARP2215
CARP2221
OSHA for Construction
This Occupational Safety and Health Administration (OSHA) Construction safety course trains workers and employers on recognition, avoidance, abatement and prevention of safety and health hazards in the workplace. This course includes information on workers' rights, employer responsibilities and how to file a complaint. This course is part of the Carpentry program which is accredited by the Home Builders Institute (HBI) and the National Association of Home Builders (NAHB). (2Cr - 2 lecture, 0 lab)
2.00 CARP2221
CARP2232
Doors, Casework and Interior Hardware
In this course students will locate casework on blueprint and identify the correct hardware and cabinets. Students will install casework, hang doors with correct hardware, and complete other steps to close out a commercial project. This course is part of the Carpentry program which is accredited by the Home Builders Institute (HBI) and the National Association of Home Builders (NAHB). (3 Cr, 1 lect, 2 lab)
3.00 CARP2232
CARP2235
Estimating, Scheduling and Building Codes
This course will introduce students to various methods of estimating. Students will look at scheduling work with subcontractors on job sites in meeting the project schedule. The students will review codes and how they apply to different construction sites. The students will look up codes and explain their relevance to the job. This course is part of the Carpentry program which is accredited by the Home Builders Institute (HBI) and the National Association of Home Builders (NAHB). (1 Cr – 1 lect, 0 lab)
1.00 CARP2235
CARP2270
Commercial Blueprint Reading II
Students in this course will further advance their commercial blue print reading skills. The students will study commercial plans and working drawings. This course is part of the Carpentry program which is accredited by the Home Builders Institute (HBI) and the National Association of Home Builders (NAHB). (2Cr – 1-lecture, 1- lab)
2.00 CARP2270
CARP2310
Commercial/Residential Construction Internship
In this course students will work on a construction site to gain real construction experience. Students will be introduced to the responsibility of a construction site with all the hazards and how to safely work with them. Students will learn how to work as a team. They will complete a minimum of three weeks full time on the job training. This course is part of the Carpentry program which is accredited by the Home Builders Institute (HBI) and the National Association of Home Builders (NAHB). (4 Cr - 0 lecture, 4 lab)
4.00 CARP2310

General Studies Courses (6 Credits )
Course ## Name
Credits
Course Outline
BUSO1620
Introduction to Computer
This course covers basic information about computer hardware and the use of computer software as a business productivity tool, as well as for personal use. Topics covered include the operating system and desktop environment; file and folder management; introduction to spreadsheet procedures; introduction to database creation and file management, fundamental word processing concepts, and presentation graphics. Some basic computer literacy will be covered, such as e-mail etiquette, ethical computing, document attachment to e-mail and use of digital files. This course is part of the Associate in Applied Science Administrative Assistant and Medical Administrative Assistant degrees which are accredited by the Accreditation Council for Business Schools and Programs (ACBSP). (2 Cr - 1 lect, 1 lab)
Course Outline BUSO1620
2.00 BUSO1620
GSCM1510
Workplace Human Relations
This course examines interpersonal relationship skills in the work environment. Students evaluate individual strengths and weaknesses and assess and learn transferable skills. This course emphasizes employment-enhancing skills that include understanding and improving relationships and communication with co-workers, supervisors, subordinates, and customers. This survey course introduces concepts and methods for improvement of interpersonal relations. (2 Cr - 2 lect, 0 lab)
Course Outline GSCM1510
2.00 GSCM1510
MATH1020
Technical Math I
This course covers basic mathematics and elements of algebra that will prepare students for success in their specific technical areas. Students will develop their problem solving skills and master mathematical concepts used in specific technical applications. Students will receive a grade for this course. It will not meet MnTC Mathematics and Logical Reasoning requirements for graduation. Prerequisite: A score of 56 or above on the Accuplacer Arithmetic test, a score of 51 or above on the Elementary Algebra test or Math 0540. (2 Cr - 2 lect, 0 lab)
Course Outline MATH1020
2.00 MATH1020

Carpentry, Commercial (DIP) Program Curriculum was last updated on 12/07/2015

Getting Started   Riverland Resources   Career Planning   MyLearning